Macintosh SE/30 & SE Assembled Power Supply Board

Fully Assembled (No Soldering Required) Apple Macintosh SE/30 & SE AC/DC Power Supply Board (PSU) Universal Design for Apple, Sony, ASTEC

Apple Macintosh SE/30 or SE AC-DC Power Supply

This is a new Apple Macintosh SE/30 or SE AC-DC power supply board using all-new, modern components.

The design has been bench tested using an SE/30 outfitted with a PDS 68040 accelerator, Ethernet board and SCSI emulator board, and 128 MB of RAM.

During A/B testing of this design with an ATX converted supply, it was observed to have noticeably improved CRT display ripple over the Flex ATX PSU commonly used for PSU modernizations.

Compatible with Apple (Hitachi), Sony, and ASTEC versions (Sony configuration pictured in listing)
No soldering required - No need to harvest connector components from original PSUs. You can keep your original board intact.
Includes external board fuse for additional safety and serviceability
Drop-in bespoke design for the PSU enclosure with minimal impact to the original machine
New +5V AUX connector for systems that need direct power to the logic board
LED power indicator to add another internal light source to your transparent SE case

$129.00USD

🔍Hardware Compatibility Diagnostic(Action Required)Pre-Purchase Check

Select your Macintosh ModelRequired

Select Power Supply BrandRequired

ℹ️

Compatible retrofit configuration.

👉 Select all options above to confirm compatibility before purchasing.

PSU Type(Select Required)

Select your preferred hardware build option:

+5 VDC 4-Pin AUX Connector (optional)(Select Required)

Select your preferred hardware build option:

High-Voltage Safety Acknowledgment

Servicing vintage compact Macintoshes involves hazardous AC mains voltage and CRT anode capacitors (10,000V+). Disconnecting mains and discharging CRT is strictly required.

I acknowledge high-voltage hazards and assume personal responsibility.

California Prop 65: This hardware product may contain traces of lead used in electronics soldering. www.P65Warnings.ca.gov

⚠️ Current batch allocated. Next production run enqueued.

1x Assembled PCB

1x DC Cable Assembly (Configured to your AC connector choice)

1x Installed AC connector (no soldering!)

1x Integrated External Safety Fuse Installed

The PSU enclosure is not included. Before ordering, please determine the type of PSU you plan to retrofit to ensure the correct AC connector is installed on the board. Each build is configured based on your order, so please allow a few days for shipping.